It is a bit disappointing that Apple doesn’t not introduce the replacement of Corning Gorilla glass with Sapphire glass. If you once again shatter your iPhone 6s LCD and you have to move into consideration whether you should buy a new phone or replace a new screen by a repair tech or yourself if you didn’t subscribe any Apple Care plan.
Once again, please don’t consider to replace your iPhone 6s LCD if you are not confident or you don’t think you are a handy person since replacing a iPhone 6s LCD assembly needs extreme care since a 3D touch layer is introduced and any careless mistake will damage the 3D touch feature.
Step 1
Power off your iPhone 6s.
Step 2
Remove the 2 screws underneath. Apply heat to four sides of screen in order to soften the adhesive before we detach the assembly.
Step 3
Open a small gap between the LCD assembly and body by the suction cup and case opening tool.
Step 4
Flip open the iPhone 6s LCD screen assembly slowly.
Step 5
Remove the metal shield which covers the flex cables by taking off the 5 screw, as the picture shown.
Step 6
Detach the front facing camera flex cable, 3D touch flex cable and LCD digitizer flex cable.
Step 7
Remove the home button bracket by taking off the two Philips head screws.
Step 8
Detach the home button connector and remove the home button by apply heat on it in order to loosing the adhesive.
Step 9
Remove the front camera metal shield by taking off that 3 screws.
Step 10
Apply heat to the front facing camera with sensors cable in order to remove the ear piece.
Step 11
Undo the 8 Philips head screws holding the metal plate.
Step 12
Take off the home button connector cable.
Step 13
Heat up the 3D touch layer edges and pry up the layer with extreme care.
Step 14
Reverse all the step above and reinstall all the components back to the body.
No comments:
Post a Comment